How To Fix: ‘Can’t Connect To This Network’

Have users arranged the Wi-Fi yet are getting “can’t connect to this network” errors on your Desktop Computer? Don’t be concerned. We realise how inconvenient this situation should be for everyone since we have experienced it ourselves, prompting us to produce the “how to solve” tutorial.

One of my major complaints about such a pop – up is that, while it informs us how the Wi-Fi connections just can not be formed, it doesn’t explain wherefore. It’s the equivalent of ringing the assistant’s doorbell but again not expressing your dissatisfaction when she ultimately answers.

Stepping forward after weird comparisons, one could still pinpoint, figure, understand, and repair the real source of the Wins computer settings “can’t connect to this network” issue.


One of the challenges you might run into when attempting to link your Windows system to a network is “Windows 10 can’t connect to this network.” As you’ll see, the warning doesn’t explain enough about how the problem happened or what one could do about it, beyond alerting you that you can’t access the network.

Read Also:

  1. Stream Disk Write Error
  2. Kmode Exception Not Handled

If you’ve never been in this circumstance before, you’re undoubtedly bewildered and don’t know what to do. Fortunately, there are some workarounds that will allow people to interact with your preferred network on the Device.

How To Fix Can’t Connect To This Network

It’s a rather typical issue that happens whenever your computer becomes unable to connect to a network and access online. If you don’t have a communication link, you won’t be able to send or receive content, therefore your device will be inactive.

There’s a whole variety of things that might be the cause of such behaviour, ranging between driver softwares to improper networking configuration. Here is another rundown of the most prevalent reasons of the Wins 10 “can’t connect to this network” deviation:

  • Drivers that are no longer supported
  • Configuration that are wrongly setup
  • Defects in software
  • A clogged cable
  • Account configuration is necessary.
  • A problem with the equipment
  • On the ISP’s part, there’s a hitch.

Relying over what occurred, you can use these techniques listed beneath, or if you have no experience with modifying things, start with Method 1 and work your way through until the problem is resolved.

Method 1: Tweak Wireless Network Adapter Drivers

To remedy this dilemma, we’ll teach you what to do to upgrade the wireless setup driver over the first way. The majority of cases, this problem is compounded by out-of-date network adapter components, as that is the initial thing you attempt:

Step 1: To access the panel over the start , push Wins+ X.

Step 2: From the drop-down menu, choose Device Manager.

Step 3: Designate Network Adapters either from drop-down menu, whereupon your network adapter.

Step 4: Chose “Upgrade drivers software” from the context menu after clicking right on the device.

Step 5: Pick “Auto scan for upgraded driver software” from the pop up menu.

Step 6: After that, the new driver would commence downloading and installing properly. Until you’re finished, simply tap “Close.”

Step 7: Your system should be restarted. If it didn’t locate or upgrade the drivers, you may reload it by attaching your laptop to the routers via Lan and afterwards downloading the driver from the company’s website.

Step 8: If those don’t succeed, go back to the 4th phase and chose “Surf my Computer seeking Driver Software” followed by “Allow you to decide from the devices listing.”

Step 9: Pick the suitable driver out from the listing after unchecking the “Display relevant Hardware” checkbox.

Step 10: Examine to verify whether the problem still exists.

Step 11: If the problem remains, attempt reverting your drivers by following the steps up to phase 3 and afterwards clicking right on the component and picking “Properties.”

Step 12: Choose the “Rollback Driver” button after clicking the “Driver” section.

Step 13: Follow the instructions to repeal the drivers and verify if the problem still exists.

Method 2: Power Cycle Your Router or Modem

As a backup plan, we’ll teach you what to do to attempt to rebuild the problem by shutting down the network for a few minutes and afterwards reconnecting:

Step 1: To switch away the router, hold the power on the rear.

Step 2: Once switching it on anyway, delay thirty min.

Step 3: Reconnect to the connection once it appears in your Wi-Fi connectivity search bar and verify whether the issue continues.

Does this not resolve the problem about you as well? Afterwards, check out the following procedure.

Method 3: Run The Windows Troubleshooter

If you’re still having difficulties figuring forward the matter, you may use the created networking troubleshooter to locate then resolve the ongoing disease on the system.

Step 1: From the Desktop, tap settings.

Step 2: Select Updating & Protection from the drop-down menu.

Step 3: On the sidepanel on the left, choose Troubleshoot.

Step 4: Locate Network Adapter inside the listing, right-click it, and select Launch your troubleshooter.

Step 5: This troubleshooter would locate and assist out in resolving the problem on the system.

Method 4: Change Network Key (Security/Encryption) From WPA-PSK/WPA2-PSK to WPA2-PSK with TKIP/AES For Your Wireless Adapter

Prior to Win 8, several OS’s featured the WEP, encryption. Microsoft stopped production of WEP as well as WPA-PSK in Wins 8 & later. Probably won’t be eligible to access the system if the cellular modem is indeed utilising WEP (aka WPA-PSK).

To be sure, perform the following actions: (Note: You must be linked to the internet that is causing you troubles in order to figure out this.) You could either have used an Ethernet cable or else join from such a system that isn’t affected by this problem. These instructions are always for Win 10. Under Win 8 or later variants, look for comparable models.)

Step 1: To open the task switcher, hit Wins + A.

Step 2: As from the drop-down menu, choose Configuration.

Step 3: Then select Networking and Net from the drop-down menu.

Step 4: Next select advanced settings from the drop-down menu.

Step 5: Underneath the characteristics tab, beneath protection type, you’ll see which one your networks employs.

If somehow the existing one becomes WEP, request have the network operator convert it to Wifi adapter & utilise using TKIP technique for protection; you ought to be allowed to access the network after that.

Experienced users may attempt this approach manually by joining the Desktop through a Lan network and afterwards changing the WEP / WPA-PSK protection into WPA2-PSK using TKIP/AES decryption from the router’s cordless security settings.

The simplest approach to go to the internet router is to get the Home Gateway Isp and afterwards type everything into the address field. You may acquire the IP address by going to Starting -> entering commands line then inputting ipconfig /all inside the cmd line.

Method 5: Forgetting Network

Whenever one machine has a problem, you’re normally told to relaunch it, which will presumably solve the problem. You could do the similar thing with your wired connectivity. You could attempt disconnecting and rejoining to the connection to check whether it links with no problems.

Despite the fact that it’s among the most fundamental aspects might do, it could just turn outside for us, so there was no point in risking.

Step 1: Locate the networking logo in the taskbar, click right on it, and choose Access  Networking & Net Configuration from the menu that appears.

Step 2: To see your cordless adapters, go to the Wi-Fi tab in the panelbar on the left.

Step 3: To access the next page, in the rightmost panel, select Manage recognised networking.

Step 4: You’ll get a listing of all channels to which your System has ever linked. Tick the Forgot icon next to the one you’re experiencing issues attaching to.

Step 5: The channel would no longer be included in the listing.

Step 6: To rejoin, search for it like you usually would have and pick upon that.

Method 6: Network Reset

Complaints such as “Wins 10 can’t access this networking” might occur when your useful framework is incorrect. Before going into specifics, the easiest method to fix the problem is to reconfigure all network configuration.

It resets all configuration to manufacturer standards, and you may subsequently change things if necessary.

Step 1: Upon the Workstation, use Cortana to open its Settings screen.

Step 2: Select Networking & Web from the drop-down menu.

Step 3: Pick State form the display’s side panel on left.

Step 4: Just go to the Networking Refresh choice in the rightmost column then tap it. It ought to be near the end of this display.

Step 5: To restore all configurations, select the Reset Immediately option.

Method 7: Changing Transmission Mode

In rare situations, the routers may not be able to handle the communication protocol you specified inside the transmission configurations. As a result, we’ll change the connection method in just this phase and see whether it solves the problem. As a result:

Step 1: To access the Ran alert, hit “Wins” + “R.”

Step 2: Push “Enter” after typing “Devmgmt.msc.”

Step 3: Clicking right on selected “Networking Adapter” in the “Networking Adapters” listing.

Step 4: Tap on the “Advanced” section from the “Preferences” menu.

Step 5: Choose “Disabled” as from “Option” selection and also the “802.11n” protocol from the listing.

Step 6: Examine to verify whether the problem still exists.

Method 8: Re-Enabling Wireless Adapter

In other cases, the problem can be resolved by merely deactivating the networking adapter and afterwards activating it again. This, according to reports, resolves the networking adapter’s issue and allows it to launch normally. Complete the form outlined beneath to accomplish this.

Step 1: To access the Ran alert, hit “Wins” + “R.”

Step 2: Push “Enter” after typing “Devmgmt.msc.”

Step 3: Clicking Right on the “Networking Adapter” in the “Networking Adapters” listing.

Step 4: Disconnect that adapter by right-clicking it and selecting “Stop Devices.”

Step 5: Pause 10 secs before right-clicking it anyway and selecting “Activate Devices.”

Step 6: Also, attempt to turn off whole networking adapters inside too, leaving just one utilised by the Workstation turned on.

Step 7: Examine to verify whether the problem still exists.

Method 9: Changing Network Name

In an odd twist of fate, several customers were able to resolve the problem by suddenly switching the networking name on their routers. This may be accomplished by going towards the router’s homepage and afterwards selecting Network Configuration. You may alter your networkings name underneath this section. Because this varies by device and Isps, see ones router’s handbook for explicit guidelines.

Method 10: Network Reset

A Networking Reset could also be used to resolve this issue. To accomplish that, we must first create an access panel, next put the restore phrase in there. As a result:

Step 1: To activate the Ran alert, click “Windows” + “R.”

Step 2: To provide administrator rights, input “cmd” then push “Shft” + “Control” Plus “Enter.”

Step 3: To run the instructions, put them in and then hit “Enter.”

Step 4: Restart your device after the instructions have been run.

Step 5: Examine to verify whether the problem still exists.

Read Also:

  1. Start Menu Not Working
  2. Driver Power State Failure
  3. Ethernet Doesn’t Have a Valid IP Configuration


Ultimately, these were the solutions recommended for people experiencing the “can’t connect to this network” problem. Fortunately, you were able to use one of the options. If those who didn’t, the issue is very certainly with your web host.

It’s possible that the two of you can get to chat. The “Windows can’t connect to this network” problem effectively paralyses you since it prevents you from going online, which implies users won’t be able to obtain your websites, documents, or anything else which demands a web Access.

Bugs are by far the most inconvenient stuff to deal with during working on a computing device since they reduce yields. As a result, you should know how to deal with and take corrective measures.

If you have been able to find a solution through any of the solutions listed previously, kindly post your thoughts inside this comment thread beneath.