The DPC Watchdog Violation error is among the most annoying BSOD (Blue Screen Of Death) errors that can appear in any Windows version. The code 0x00000133 is a BSOD bug check.
The Watchdog word refers to the bug checker that monitors or tracks your programmes and the performance of your PC. DPC stands for Deferred Procedure Call, and the Watchdog name refers to the bug checker that monitors or tracks your programmes and the performance of your PC.
We’ll try to shed some light on the situation and assist you in resolving the problem on Windows 10 computers.
What Causes The DPC Watchdog Violation Error?
This issue can occur in conjunction with other BSODs, and they all have a common cause. If you go to the official Microsoft page, you may learn more about this problem:
This bug check shows that the DPC watchdog was activated, either because it detected a single long-running deferred procedure called (DPC) or because the system was at an interrupt request level (IRQL) of DISPATCH LEVEL or higher for an extended period of time.
The value of Parameter 1 indicates if a single DPC exceeded a timeout or whether the system spent an extended length of time at or above IRQL DISPATCH LEVEL. Windows 10 has ceased running, according to Microsoft, because it was unable to receive a response from a hardware component, its driver, or a software programme associated to it.
The most common hardware component in question is a disc drive, which causes Windows to crash when the disc becomes unreadable (similar to removing the HDD’s data cord while it’s in use). In other circumstances, the issue is caused by hardware incompatibility, an outdated BIOS or UEFI, SSD difficulties, improper overclocking, or even a malware infection.
Other DPC DPC Watchdog Violation Errors
All of the remedies shown below will also work if you get the following errors:
DPC Watchdog Violation on boot – This problem comes after you start your computer and could be caused by a hard drive malfunction.
When connecting to the Internet,DPC Watchdog Violation occurs. This is caused by a faulty network card driver.
When playing games, you may encounter DPC Watchdog Violation, which occurs when you try to start a game or a more complicated application and is triggered by a faulty driver.
DPC Watchdog Violation during Windows 10 installation – This occurs when you try to install Windows 10 and is caused by an issue with your BIOS or UEFI.
Bugcheck DPC Watchdog Violation– This problem occurs at random and is most likely caused by a bad driver.
DPC Watchdog Violation – Stop code- This could be due to a hardware issue or a driver that isn’t working properly.
Now that you know what this issue is and when it occurs, you can figure out how to get rid of it.
1. Check Your Cables
A defect in a cable or its connections at either end is the most common source of connectivity problems. Plugging the suspected cable into the network connector of another computer or network device is a quick way to check connectivity. The jack into which you insert the cable is usually part of a network adapter, which connects a computer or device to the network cable.
2. Replace The iastor.sys Driver
Step 1: Select Device Manager from the context menu when you right-click the Start. Select the controller with SATA AHCI in its name from the IDE ATA/ATAPI controllers list (such as Standard SATA AHCI Controller). Right-click the controller, go to Properties, choose the Driver tab, and then Driver Details to see if you’ve selected the correct controller. Check that iastor.sys is displayed as a driver, then click OK.
Step 2: Select Update Driver from the Driver tab. Choose Browse my computer for driver software from the drop-down menu. Select Allow me to choose from a list of device drivers on my computer
Step 3: Click Next after selecting Standard SATA AHCI Controller. Click Close, then restart your computer.
Microsoft claims that the iastor.sys driver is to blame for the problem, and that replacing it with a regular driver will solve the problem. You can also utilise software tools to troubleshoot a variety of blue screen errors as well as a variety of other computer problems.
3. Check Your Disk
Step 1: To open search in Windows 10, press the Windows key + S. To start Command Prompt with elevated rights, type cmd in the Search tab and choose Run as administrator.
Step 2: To run the programme, type it and hit Enter (replace C with the letter of your hard drive partition):
chkdsk /f C:
Step 3: If you don’t use the /f parameter, chkdsk will display a notice saying that the file needs to be fixed, but it won’t. The chkdsk D: /f command discovers and fixes logical problems with your hard drive. Run the /r parameter as well to fix physical difficulties.
There are various utilities that may be used to examine the health of your discs.
4. Update Your Drivers
Step 1: Select Device Manager from the Start menu by right-clicking the Start button. Select Update driver from the Disk drives section, then right-click on your disc. Next, choose the first option, Search for drivers automatically.
Step 2: The system will search for a driver and, if one is found, it will install it, requiring you to restart your computer. If the notice “The best drivers for your device are already installed” appears, go to Windows Update and search for updated drivers.
Step 3: The Windows Update section will open, and you must select View optional updates (this option will not appear unless you have at least one optional update pending).
Step 4: Select the drivers you want to install by checking the boxes next to them, then clicking the Download and Install We found an unrelated driver in our case, but if a driver for your disc drive is available, you should definitely install it.
Step 5: Restart your computer after the installation is completed. If you have many drives, repeat the process for each one.
5. Update Your OS
Step 1: Go to the Start menu and choose Settings. Select Update & Security from the drop-down menu. Now, select Check for Updates from the drop-down menu.
Step 2: If any updates are available, they will be listed under the same button, and you will only need to click the Download button beneath it.
Step 3: After the updates have been downloaded and installed, you will be requested to restart your computer in order for the changes to take effect.
Step 4: Make sure your computer has the most recent Windows OS upgrades installed. As a reminder, Microsoft releases Windows updates on a regular basis to improve the system’s reliability and address other bugs.
The DPC WATCHDOG VIOLATION problem may be resolved by installing the most recent Windows updates on your computer.
Even if you were able to resolve this BSOD mistake, it doesn’t imply it won’t happen again, so it’s critical to take steps to avoid it from happening again. Protect your computer from malware and viruses by keeping it clean. Make sure you have the correct drivers and keep them up to date.